con-dev (0.1.5.snapshot20150205155617weslok-0git49676ef~ab~SID+0) sid-ab-experimental; urgency=low

  [ Stephan Sürken ]
  * Initial packaging.

  [ Automated changes by ui-auto-release ]
  * New upstream 0.1.5.snapshot20150205155617weslok (unstable): Reusing
    UNRELEASED section formerly versioned 0.1.5-0~0local0
  * UP: con-dev-0.1.5.snapshot20150205155617weslok (unstable) (Thu, 05 F
  * UP: eb 2015 15:56:18 +0000):
  * UP:
  * UP: Snapshot unstable release.
  * UP:
  * UP: Changes since :
  * UP:
  * UP: PLEASE_ADD_CHANGES_HERE
  * UP: ----------------------------------------------------------------
  * UP: Summaries of important changes how ui-auto is used or behaves.
  * UP: See ChangeLog for more details.
  * UP:
  * UP: Downloads:
  * UP:   o Generic: http://volvic.schlund.de/~tarball/ui-auto
  * UP:   o Current: http://volvic.schlund.de/~tarball/ui-auto/unstable/
  * UP: ui-auto-1.1.9.tar.gz
  * UP: ================================================================
  * UP: ui-auto-1.1.10 (unstable) (UNRELEASED):
  * UP:
  * UP: Features/Changes:
  * UP:    * ui-auto-uvc:
  * UP:      - git_update: Detect git-svn, and rebase from remote svn
  * UP:        instead of pulling.
  * UP:
  * UP: Fixes:
  * UP: ----------------------------------------------------------------
  * UP: ui-auto-1.1.9 (unstable) (Thu Jun  4 09:01:44 UTC 2009):
  * UP:
  * UP: Features/Changes:
  * UP:    * ui-auto-release:
  * UP:      - Make dput options configutable per user.
  * UP:      - Retry with changed options on dput failures.
  * UP:      - '-S': Now given without separator, and used for Debian
  * UP:        revision snapshots, too.
  * UP:      - User interface improvements.
  * UP:      - Make automatic mode interactively selectable after
  * UP:        overview page.
  * UP:      - Make snapshot separator configurable; means you can now
  * UP:        select your versioning policy:
  * UP:        '.': Set new version before you release.
  * UP:        '~': Set new upcoming version _after_ you release.
  * UP:      - For convenience, start shipping templates for common
  * UP:        Debian configurations; initial template is "deb_svn+mbd".
  * UP:    * ui-auto-uvc:
  * UP:      - Omit '.' separator for vc version string (svn123 rather
  * UP:        than svn.123).
  * UP:      - Implement "local/path".
  * UP:
  * UP: Fixes:
  * UP:    * ui-auto-uvc:
  * UP:      - Forgot to migrate vc "local" for new vc loc scheme.
  * UP:      - Add "local" to list of supported vcs.
  * UP:      - Make "local" default if no other supported vc is found.
  * UP:      - "local/checkout": Protect against copying "/." on empty
  * UP:        given src.
  * UP:    * ui-auto-release:
  * UP:      - debian_package: Re-read package version after optional
  * UP:        manual version changes.
  * UP:      - debian only mode:
  * UP:        - Enable stable/unstable switch via -T.
  * UP:        - Version magic: Honor all (three) possible use cases.
  * UP:        - "Unreleased" use case: Protect sed to only replace in
  * UP:          first line.
  * UP:      - '-f': Protect default name to be search in PATH
  * UP:        (.ui-auto.conf->./.ui-auto.conf).
  * UP: ----------------------------------------------------------------
  * UP: ui-auto-1.1.8 (unstable) (Wed May 20 09:20:36 UTC 2009):
  * UP:
  * UP:          === Changes from 1.1.7 ===
  * UP:
  * UP: Features/Changes:
  * UP:    * libopt: On error, output failing command line for better
  * UP:      debugging.
  * UP:    * autotools/m4: doxygen: On --disable-ui-doxygen, output a
  * UP:      notification file for each possible target (def html latex
  * UP:      man rtf xml) instead of just a top level README; this helps
  * UP:      installers as they can expect the same files/dirs in both
  * UP:      situations.
  * UP:    * ui-auto-release:
  * UP:      - Add "Debian only mode" support to be able to use sequent
  * UP:        'debian_package' for native Debian packages (or where we
  * UP:        do not control upstream).
  * UP:      - Sequent 'debian_package': Re-use top-level sections
  * UP:        marked as UNRELEASED, and add even more magic around the
  * UP:        automated changes.
  * UP:      - Add common ui_commit function; for any commits, this
  * UP:        - adds affirmation.
  * UP:        - adds diff view.
  * UP:        - adds re-edit options.
  * UP:        - always skips on snapshot mode.
  * UP:    * ui-auto-uvc: Add command "diff".
  * UP:
  * UP:          === Proposed 1.0.x->1.2.x NEWS ===
  * UP:
  * UP: This new main release focuses on support for the "cmake" build
  * UP: system and major updates to ui-auto-release. The latter includes
  * UP: support for clean vc strapping before release, more flexible via
  * UP: "sequence" support, automated Debian release, non-interactive
  * UP: runs and project config "check+doc+print" support.
  * UP:
  * UP: Version control: Added support for meta VC "local" and "git"
  * UP: (experimental).
  * UP:
  * UP: No changes (1) are needed to update projects using 1.0.x; you
  * UP: will need to amend your project config if you want to use the
  * UP: new Debian support, however.
  * UP:
  * UP: Notes:
  * UP:
  * UP: (1) If you use autotools, the UI_INIT macro and have "long"
  * UP: filenames in your project: Note that "tar-ustar
  * UP: filename-length-max=155" is no longer hardcoded default as
  * UP: automake option; instead, you now set automake options yourself
  * UP: using arg 5 of UI_INIT: I recommend just using tar-pax nowadays:
  * UP: 'UI_INIT([src/foo/main.c],,,,[tar-pax])'.
  * UP: ----------------------------------------------------------------
  * UP: ui-auto-1.1.7 (unstable) (Thu Apr  9 09:10:00 UTC 2009):
  * UP:
  * UP:          === Proposed 1.0.x->1.2.x NEWS ===
  * UP:
  * UP: This new main release focuses on support for the "cmake" build s
  * UP: ystem
  * UP: and major updates to ui-auto-release. The latter includes suppor
  * UP: t for
  * UP: clean vc strapping before release, more flexible via "sequence"
  * UP: support, automated Debian release, non-interactive runs and proj
  * UP: ect
  * UP: config "check+doc+print" support.
  * UP:
  * UP: Version control: Added support for meta VC "local" and "git"
  * UP: (experimental).
  * UP:
  * UP: No changes (1) are needed to update projects using 1.0.x; you wi
  * UP: ll
  * UP: need to amend your project config if you want to use the new Deb
  * UP: ian
  * UP: support, however.
  * UP:
  * UP: Notes:
  * UP:
  * UP: (1) If you use autotools, the UI_INIT macro and have "long" file
  * UP: names
  * UP: in your project: Note that "tar-ustar filename-length-max=155" i
  * UP: s no
  * UP: longer hardcoded default as automake option; instead, you now se
  * UP: t
  * UP: automake options yourself using arg 5 of UI_INIT: I recommend
  * UP: just using tar-pax nowadays: 'UI_INIT([src/foo/main.c],,,,[tar-p
  * UP: ax])'.
  * UP:
  * UP:          === Changes from 1.1.6 ===
  * UP:
  * UP: Features/Changes:
  * UP:   * Add cmake macro support; macros will be installed to
  * UP:     /usr/share/ui-auto/cmake. Initial entry is
  * UP:     FindApache1.3.cmake.
  * UP:   * ui-auto-uvc:
  * UP:     - Skip "preprocess" part which was needed for (older) svn
  * UP:       implementations only; effectively fixes running "svn up"
  * UP:       unwanted.
  * UP:     - New command "add".
  * UP:     - Add path (-P) support.
  * UP:   * ui-auto-ubs: cmake strap now initially supports the clean
  * UP:     ("c"|"C") options.
  * UP:   * ui-auto-release:
  * UP:     - Sequent bs_strap now also runs clean with strap; this may
  * UP:       be needed in "local checkout mode" to get clean build env.
  * UP:     - '-f': Convenience: Enhanced code so you may use checkout
  * UP:       mode from outside the project and w/o giving "-C svn/URL"
  * UP:       explicitly using "-f x/project/.ui-auto.conf -c".
  * UP:     - Better error handling on sequent failure.
  * UP:     - Add "ui_release_deb_orig_commit" (diversed) config option;
  * UP:       you may automate Debian orig tarball checkin with that.
  * UP:     - Sequent "fail-over" in interactive mode.
  * UP:     - Add new wrapper tool "ui-auto-release-multi" to simplify
  * UP:       configuration of multiple, automatic runs.
  * UP:     - Caveat fix: On VC path autodetection (-c), actually
  * UP:       compute the vcpath from the VC working directory (via
  * UP:       ui-auto-uvc -P) instead of using configuration from
  * UP:       .ui-auto.conf (think about releasing a patch release from
  * UP:       a fresh branch).
  * UP:     - Sequent status support, and always print sequence results
  * UP:       on exit.
  * UP:     - Sequent doc support (i.e., show doc and ask before any
  * UP:       sequence). New option -I to see doc.
  * UP:     - Add a non-action mode, option "-n".
  * UP:
  * UP: Fixes:
  * UP:   * -ubs and -uvc: checkinstallation: Generalize installation
  * UP:     checks, and effectively add error message to stderr on
  * UP:     error.
  * UP:   * -uvc: svn: dont run "svn up" when getting version. Instead,
  * UP:     use svnversion and also chake for existence of that tool.
  * UP:   * Non-snapshot release: Don't open EDITOR for autonews in
  * UP:     automatic mode.
  * UP:   * -f: When config file is given on command line, also run
  * UP:    checks for that file (not .ui-auto.conf).
  * UP:   * -ubs: distcheck/cmake: Add missing package build.
  * UP:   * Auto upstream changes: Fix folding/prefix handling;
  * UP:     recommended line length is now 64 chars.
  * UP:   * Check/exit on root user later so informational actions like
  * UP:     -h -p -P are avaiable for root.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-1.1.6 (unstable) (Wed Mar 11 09:21:49 UTC 2009):
  * UP:
  * UP:          === Proposed 1.0.x->1.2.x NEWS ===
  * UP:
  * UP: This new main release focuses on support for the "cmake" build s
  * UP: ystem
  * UP: and major updates to ui-auto-release. The latter includes suppor
  * UP: t for
  * UP: clean vc strapping before release, more flexible via "sequence"
  * UP: support, automated Debian release, non-interactive runs and proj
  * UP: ect
  * UP: config "check+doc+print" support.
  * UP:
  * UP: Version control: Added support for meta VC "local" and "git"
  * UP: (experimental).
  * UP:
  * UP: No changes (1) are needed to update projects using 1.0.x; you wi
  * UP: ll
  * UP: need to amend your project config if you want to use the new Deb
  * UP: ian
  * UP: support, however.
  * UP:
  * UP: Notes:
  * UP:
  * UP: (1) If you use autotools, the UI_INIT macro and have "long" file
  * UP: names
  * UP: in your project: Note that "tar-ustar filename-length-max=155" i
  * UP: s no
  * UP: longer hardcoded default as automake option; instead, you now se
  * UP: t
  * UP: automake options yourself using arg 5 of UI_INIT: I recommend
  * UP: just using tar-pax nowadays: 'UI_INIT([src/foo/main.c],,,,[tar-p
  * UP: ax])'.
  * UP:
  * UP:          === Changes from 1.1.5 (unstable) ===
  * UP:
  * UP: Features/Changes:
  * UP:   * New tool "ui-auto-ubs" (Universal Build System) analogous to
  * UP:     *-uvc. This will fully encapsulate the build system so all t
  * UP: ools
  * UP:     will just work for all build systems supported.
  * UP:     - Obsoleted/removed: "ui-auto-strap". Use "ui-auto-ubs" now.
  * UP:     - For cmake, 'dist' is no longer done in an extra dir per de
  * UP: fault
  * UP:       (does no fit for ui-auto-ubs). Use 'c' or '-C local/`pwd`'
  * UP:       as replacement.
  * UP:   * VC: Add experimental support for "git".
  * UP:   * VC: Add experimental support for meta-vc "local".
  * UP:   * release: Add check: Build system installation.
  * UP:   * release: Add upstream changes to Debian changelog (when
  * UP:     autonews=true).
  * UP:   * Introduce "sequence" support; may be tainted via -Q option.
  * UP: This
  * UP:     obsoletes the -O (omit) option and the -U (manual upload) op
  * UP: tion,
  * UP:     and offers generic finegrained control over what to do if ne
  * UP: eded.
  * UP:   * New -R option: Remove local files (tarball*, deborig*, debbu
  * UP: ilds).
  * UP:   * New -f /-F options: Manually set project and user config fil
  * UP: e
  * UP:     locations.
  * UP:   * -S: This now sets the whole version appendix; means you are
  * UP: able
  * UP:     to create rc snapshots w/o timestamp version like so
  * UP:     'ui-auto-release -S ~rc1'.
  * UP:
  * UP: Fixes:
  * UP:   * Error handling fix: Default answers change to "N" for: tarba
  * UP: ll
  * UP:     overwrite, upload overwrite, continue on upload error, conti
  * UP: nue
  * UP:     on notify error, continue on debbuild error, ignore local ch
  * UP: ange
  * UP:     in checkout mode.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-1.1.5 (unstable) (Fri Feb 27 15:05:13 UTC 2009):
  * UP:
  * UP:          *** This unstable release ***
  * UP:
  * UP: Features/Changes:
  * UP:   * m4: UI_INIT: Add option to configure automake per project; d
  * UP: rop
  * UP:     default "tar-ustar filename-length-max=155" to none (you may
  * UP:  add
  * UP:     this to your project to get exactly the same behaviour).
  * UP:   * Add new user pref: 'ui_auto_userpref_tmpdir' for systems whe
  * UP: re
  * UP:     /tmp is just not big enough.
  * UP:   * Add '-K' = keep temporary option; useful for debugging.
  * UP:
  * UP: Fixes:
  * UP:   * Update ourselves to use "tar-pax".
  * UP:   * Ignore GNU extension warnings in src/tools (we want to use t
  * UP: hem).
  * UP:   * Fix error output for user=root warning.
  * UP:   * Fix error handling when no BS found; clean up basic
  * UP:     "no-project dir" errors.
  * UP:   * Add error message when dbuild fails.
  * UP:   * Fix removal of temporary Debian checkout.
  * UP:   * Fix onExit functions for subshells.
  * UP:
  * UP:           *** Proposed 1.0.x->1.2.x NEWS ***
  * UP:
  * UP: This new main release focuses on support for the "cmake" build s
  * UP: ystem
  * UP: and major updates to ui-auto-release. The latter includes suppor
  * UP: t for
  * UP: clean vc strapping before release, automated Debian release,
  * UP: non-interactive runs and project config "check+doc+print" suppor
  * UP: t.
  * UP:
  * UP: No changes (1) are needed to update projects using 1.0.x; you wi
  * UP: ll
  * UP: need to amend your project config if you want to use the new Deb
  * UP: ian
  * UP: support, however.
  * UP:
  * UP: Notes:
  * UP:
  * UP: (1) If you use autotools, the UI_INIT macro and have "long" file
  * UP: names
  * UP: in your project: Note that "tar-ustar filename-length-max=155" i
  * UP: s no
  * UP: longer hardcoded default as automake option; instead, you now se
  * UP: t
  * UP: automake options yourself using arg 5 of UI_INIT: I recommend
  * UP: just using tar-pax nowadays: 'UI_INIT([src/foo/main.c],,,,[tar-p
  * UP: ax])'.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-1.1.4 (unstable) (Tue Feb 17 12:07:03 UTC 2009):
  * UP:
  * UP: Initial unstable release with (mainly) major updates to
  * UP: ui-auto-release: vc strap support, debian support, non-interacti
  * UP: ve
  * UP: support, config check+doc+print support.
  * UP:
  * UP:   * src/tools/Makefile.am: Bugfix: Only remove produced manpages
  * UP: , not
  * UP:     all.
  * UP:   * ui-auto-uvc:
  * UP:     - Add new option -V: Create version suitable for snapshots.
  * UP:     - Internal cleanup to we can better integrate new vcs.
  * UP:   * ui-auto-release:
  * UP:     - Support for automatic Debian releases (directly following
  * UP: the
  * UP:       project's release).
  * UP:     - Snaphots are no longer produced in an extra procedure; you
  * UP:  rather
  * UP:       taint releasing now for snaphots. Option "-r" hence obsole
  * UP: te and
  * UP:       removed.
  * UP:     - Tarballs are now generated in "..".
  * UP:     - Redo interactive input handling, and add a -A (non-interac
  * UP: tive)
  * UP:       switch.
  * UP:     - Add support to manually chose distributions (stable/unstab
  * UP: le).
  * UP:       Skip -U (manual tarball upload).
  * UP:     - VC Bootstrap support (see -c and -C options).
  * UP:     - Skip meta dist "snapshot"; instead we have stable and unst
  * UP: able snapshots
  * UP:     - Make Debian package building configurable for stable/unsta
  * UP: ble + snapshot.
  * UP:     - Notify/upload: Skip when config not set.
  * UP:   * Docs:
  * UP:     - Add example user conf file.
  * UP:     - Many updates in ~.ui-auto.conf.
  * UP:   * Add user preferences in ~/.ui-auto.conf:
  * UP:     - nosign: Always skip gpg signing.
  * UP:     - dbuild_options: Always use these buildpackage options.
  * UP:   * .ui-auto.conf project configuration updates:
  * UP:     - Put all items and their docs into ui-auto-release. Use
  * UP:       'ui-auto-release -p' now to get an example conf+docs.
  * UP:     - Add the notion of default values; again, use
  * UP:       'ui-auto-release -p' to see them.
  * UP:     - Re-nice and update our ui-auto's .ui-auto.conf as project
  * UP: example.
  * UP:     - Add the notion of manadtory config options, and add an aut
  * UP: omated
  * UP:       check.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-1.1.2 (unstable) (Wed Jan  7 16:57:20 UTC 2009):
  * UP:
  * UP:   * ui-libopt.sh: Install to pkgdatadir ("/usr/share/ui-auto"),
  * UP: not
  * UP:     bin; add new include recommendations, update all internal ui
  * UP: -*.
  * UP:   * ui-auto.conf: Remove obsoleted src/example from path.
  * UP:   * Add automatically produced man pages for all ui-auto-* tools
  * UP: .
  * UP:   * Fix: Make AUTHORS non-empty (add me for now).
  * UP:   * Fix: ui-auto-shell: Assure -env is in same dir.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-1.1.1 (unstable) (Mon Dec 15 17:55:38 UTC 2008):
  * UP:
  * UP:   * Fix: Install man page to man1.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-1.1.0 (unstable) (Mon Dec 15 17:36:33 UTC 2008):
  * UP:
  * UP: Initial unstable 1.1.x release.
  * UP:
  * UP:   * Support cmake build system.
  * UP:   * Bugfix: Version comparison code in UI_CHECK.
  * UP:   * Produce a man page for the PACKAGE-version script.
  * UP:   * cruft: Add ".git" directories to cruft.
  * UP:   * ui-auto-shell: If set, use shell given in env $SHELL.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-1.0.0 (stable) (Wed Jun 18 14:05:53 UTC 2008):
  * UP:
  * UP: Initial stable release; no changes to alpha/10.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-0.1.109 (unstable) (Wed Apr 23 16:33:59 UTC 2008):
  * UP:
  * UP: This is the tenths alpha version for ui-auto 0.2 (stable).
  * UP:
  * UP:   * ui-auto-shell: Don't always run with "-p" (change to project
  * UP: s wd).
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-0.1.108 (unstable) (Thu Feb 14 13:27:27 UTC 2008):
  * UP:
  * UP: This is the ninths alpha version for ui-auto 0.2 (stable).
  * UP:
  * UP:   * ui-auto-release: Fix typo on branch tagging on release (vers
  * UP: ion tag was used).
  * UP:   * ui-auto-release: (svn only) Fix typo on version tagging when
  * UP:  releasing from a branch (trunk was used).
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-0.1.107 (unstable) (Tue Jan 29 14:11:34 UTC 2008):
  * UP:
  * UP: This is the eighths alpha version for ui-auto 0.2 (stable).
  * UP:
  * UP:   * ui-auto-sp2ui: Some smaller ennhancements:
  * UP:     - Show note that you might need to update ignore settings.
  * UP:   * README: Add hints form ui-utilcpp's README about former SPRe
  * UP: lease here.
  * UP:   * ui-auto-env: Add option "-p" to automatically change to the
  * UP: project's working directory.
  * UP:   * Add new utility tool: ui-auto-shell (like ui-auto-env, but r
  * UP: uns a new tainted shell).
  * UP:   * ui-auto-release: Explain arg for -U in usage help.
  * UP:   * Makefile.am: Depend on automake 1.10 (else , -I for aclocal
  * UP: doesn't not work).
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-0.1.106 (unstable) (Thu Jan  3 16:02:11 UTC 2008):
  * UP:
  * UP: This is the seventh alpha version for ui-auto 0.2 (stable).
  * UP:
  * UP: This is a fix and cleanup release after initial conversion to ui
  * UP: .
  * UP:
  * UP:   * ui-auto-sp2ui: Bugfix: Accidentially converted itself when u
  * UP: pdating
  * UP:     ourselves to ui; changes reversed, usable again.
  * UP:   * ui-auto-uvc: For vc "svn", on "tag", try to "mkdir" the dire
  * UP: ctory
  * UP:     where to put the copy.
  * UP:     Practically, this means you do not need to create directorie
  * UP: s
  * UP:     tags/my-project or branches/my-project manually before using
  * UP:     ui-auto-release -r.
  * UP:   * ui-auto-uvc: Enhancement: Reniced error handling, not showin
  * UP: g usage
  * UP:     help on non-usage-failures (e.g., when check_sync fails).
  * UP:   * ui-auto-release: Add "-N" expert option to extract NEWS snip
  * UP: pets.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: ui-auto-0.1.105 (unstable) (Wed Dec 19 17:37:22 UTC 2007):
  * UP:
  * UP: This is the sixth alpha version for sp-auto 0.2 (stable).
  * UP:
  * UP: Initial ui-auto release, completely replacing former sp-auto.
  * UP:
  * UP: sp-auto and ui-auto can be used in parallel -- i.e., no one is f
  * UP: orced
  * UP: to update. As there won't be any more sp-auto releases, it is hi
  * UP: ghly
  * UP: recommended though, and it should be fairly simple using the pro
  * UP: vided
  * UP: ui-auto-sp2ui tool.
  * UP:
  * UP:   * Complete conversion from "sp" to "ui" prefix (programs, macr
  * UP: os,
  * UP:     functions, configuration files, variables, project name).
  * UP:   * Add tool ui-auto-sp2ui; this can be used to auto-update a fo
  * UP: rmer
  * UP:     sp-auto enabled project to ui-auto.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: sp-auto-0.1.104 (unstable) (Fri Apr 27 13:35:12 UTC 2007):
  * UP:
  * UP: This is the fifth alpha version for sp-auto 0.2 (stable).
  * UP:
  * UP:   * Remove local "svn2cl" tool, which is now included in "subver
  * UP: sion-tools".
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: sp-auto-0.1.103 (unstable) (Mon Mar 12 13:31:02 UTC 2007):
  * UP:
  * UP: This is the fourth alpha version for sp-auto 0.2 (stable).
  * UP:
  * UP:   * Initial etch based release -- i.e., automake 1.10, autoconf
  * UP: 2.61.
  * UP:   * sp-auto-env: Some convenience fixes:
  * UP:     - don't set var if duplicate (fixes cosmetic errors like mul
  * UP: tiple
  * UP:       ::: in PATH).
  * UP:     - ACLOCAL: rm space after -I (might lead to errors).
  * UP:     - duplicate identification for env var items hardened.
  * UP:     - Fix: when calling ourselves (with -d), use ${0} to
  * UP:       make this work in a "strap" situation.
  * UP:   * doc: README updates.
  * UP:   * doc: Add a short (yet unfinished) introduction (file INTRODU
  * UP: CTION).
  * UP:   * sp-libopt.sh: Add sp_opt_set to arbitrarily set options if n
  * UP: eeded.
  * UP:   * sp-libopt.sh: Add "imply" feature to easily group options to
  * UP: gether.
  * UP:   * sp-auto-update: Add -a (-c -u) and -A (-d -c -u) group optio
  * UP: ns
  * UP:     for convenience. See "sp-auto-update -h".
  * UP:   * m4/doxygen: Don't check for doxygen tools if --disable-sp-do
  * UP: xyen
  * UP:     is given.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: sp-auto-0.1.102 (unstable) (Tue Nov 21 14:24:43 UTC 2006):
  * UP:
  * UP: This is the third alpha version for sp-auto 0.2 (stable).
  * UP:
  * UP:   * sp-auto-uvc: Add "-S" option to arbitrarily set VCS.
  * UP:   * sp-libopt.sh: Add "sp_opt_givenPos()" function.
  * UP:   * sp-auto-uvc: Add "checkout" command.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: sp-auto-0.1.101 (unstable) (Wed Nov  8 10:12:03 UTC 2006):
  * UP:
  * UP: This is the second alpha version for sp-auto 0.2 (stable).
  * UP:
  * UP: Bugfix release only.
  * UP:
  * UP:   * PACKAGE-version and version.h automatic targets: Create
  * UP:     inst. directories also, if not existent.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: sp-auto-0.1.100 (unstable) (Fri Nov  3 12:29:23 UTC 2006):
  * UP:
  * UP: This is the first alpha version for sp-auto 0.2 (stable). A lot
  * UP: of
  * UP: things have changed in both, the tools (for those who use or dev
  * UP: elop
  * UP: in sp-auto enabled projects) and the autotools/m4 support (for t
  * UP: hose
  * UP: actually maintaining an sp-auto enabled project).
  * UP:
  * UP: Please see the top level README on how to update from <= 0.1.3 (
  * UP: for
  * UP: both user groups).
  * UP:
  * UP: Changes in a nutshell:
  * UP:
  * UP:   * Tools now all use "getopt" options. Try -h on any tool.
  * UP:   * All tools have been reworked and many quirks/oddities been r
  * UP: emoved.
  * UP:   * All m4 macros have been reworked, so a bunch of redundancies
  * UP:  and
  * UP:     oddities may be removed from projects.
  * UP:   * Separate support for versioning systems (sp-auto-uvc).
  * UP:
  * UP: More details (i.e., more as usual) in the ChangeLog; for conveni
  * UP: ence,
  * UP: here is the main checkin's changelog (reading the README may suf
  * UP: fice
  * UP: though):
  * UP:
  * UP:   * Adding initial version of sp-auto-update tool.
  * UP:   * src/tools: Add sp-libopt.sh (getopts posix shell library). [
  * UP:  removing src/sh, mv sh/sp-opt.sh->tools/sp-libopt.sh ].
  * UP:   * src/tools: Add optional "non-POSIX" test when checkbashisms
  * UP: (devscripts.deb) is available.
  * UP:   * src/tools: Many bashisms fixed; sp-auto-release stays "bash"
  * UP:  for now.
  * UP:   * src/tools: Using sp-libopt.sh in all tools. This means usage
  * UP:     changes for all tools except for default usage. Use "-h" on
  * UP: any
  * UP:     tool for usage.
  * UP:   * User visible changes in sp-libopt.sh:
  * UP:     - Add handing for default values (options and positionals).
  * UP:     - Remove imho superflous support for per-function options.
  * UP:   * src/tools: Added sp-auto-uvc tool ("unified" version control
  * UP:  commands).
  * UP:   * src/tools: sp-auto-release: Patched up to use sp-auto-uvc.
  * UP:   * src/tools: sp-auto-env && sp-auto-update:
  * UP:     - Removing seemingly confusing magic for id ("." if not arg,
  * UP:  else DIR or
  * UP:       MULTINAME); instead, you must now give an id as configured
  * UP:  in
  * UP:     - New per user config file "~/.sp-auto.conf". This obsoletes
  * UP:  all "MULTINAME"
  * UP:       config files "~/.sp-auto-env.NAME". You can find an exampl
  * UP: e in the README.
  * UP:     - "sp-auto-env PROJECT" now creates the env for PROJECT (was
  * UP: : its
  * UP:       dependencies only); using the
  * UP:     - "-d"-Option on sp-auto-env|update _adds_ all dependencies
  * UP: [the latter two
  * UP:       changes are imho fixing some non-intuitiveness of the tool
  * UP: s]; use "-D" for
  * UP:       the old behaviour.
  * UP:     - "sp-auto-update" has added ability to store configure opti
  * UP: ons per
  * UP:       project(~/.sp-auto.conf) and an option to update project's
  * UP:       working directories from VCSes. I.e., it's now actually
  * UP:       usabable, and "sp-auto-update -d -u my_project" can now us
  * UP: ed
  * UP:       to actually update "everything".
  * UP:   * src/m4:
  * UP:     o sp-doxygen.m4:
  * UP:       - Change behaviour to be build on std build process, not d
  * UP: ist.
  * UP:       - Use simple stamp file "sp-doxygen" to guard build (was:
  * UP: phony target).
  * UP:       - This also adds new global vars SP_ALL, SP_CLEAN.
  * UP:     o sp-lib.m4 rm.
  * UP:     o Added/new/changed macros: SP_INIT,SP_CHECK (...).
  * UP:     o Use one file (sp-auto.am) for added automake targets.
  * UP:     o Principally use a bunch of well defined PHONY targets
  * UP:       (sp-auto-all sp-auto-clean sp-auto-dist sp-auto-distclean
  * UP: sp-auto-install-data sp-auto-install-exec sp-auto-uninstall)
  * UP:       to handle sp-auto-automatic Makefile.am adds.
  * UP:     o Produce PACKAGE-version script automagically (pls rm redun
  * UP: dant code in projects).
  * UP:     o Produce version.h include (for libraries) automagically (p
  * UP: ls rm redundant code in projects).
  * UP:   * Add svn2cl tool from subversion contrib (until it distribute
  * UP: d w/ subversion-tools directly).
  * UP:   * README: Cleanup: any old stuff removed or updated, add "upda
  * UP: te from 0.1.3" section.
  * UP:   * New SP_PROG_CXX, ruling out some non-working c++ compilers (
  * UP: currently g++-2.9*).
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: sp-auto-0.1.3 (unstable) (Thu Nov 10 13:43:50 UTC 2005):
  * UP:
  * UP:   * sp-auto-env: ouput variables only if they have a non-empty v
  * UP: alue
  * UP:   * sp-auto-env: added sp_env_m4_macro_paths variable support fo
  * UP: r
  * UP:     sp-auto.conf. Use it if your project has m4 macros to export
  * UP: . The
  * UP:     mechanism behind it also eliminates the need for a manually
  * UP:     updated file /usr/share/aclocal/dirlist.
  * UP:   * m4: added macro for apache module autoconf magic
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: sp-auto-0.1.2 (unstable) (Tue Nov  8 09:52:03 UTC 2005):
  * UP:
  * UP: Intermediate unstable updates/bugfixing release.
  * UP:
  * UP:   * sp-auto-release: Compat for "grep" w/o max-count option (woo
  * UP: dy).
  * UP:   * sp-auto-release: Fix parsing for m4 quotation.
  * UP:   * sh: Adding initial "sp-opt.sh": Convenience tools around POS
  * UP: IX
  * UP:     "getopts".
  * UP:   * Added new "examples" directory.
  * UP:   * Added new "sh" directory for (POSIX) shell support.
  * UP:   * m4: Added --disable-sp-doxygen option
  * UP:   * sp-auto-release: upload: Fixing sigfile location.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: sp-auto-0.1.1 (unstable) (Fri Jun 17 15:14:14 UTC 2005):
  * UP:
  * UP:   * m4: Fixing m4 todo "using actual atomake targets like dist-h
  * UP: ook,
  * UP:     etc)"; this just does not work (if you use more that one suc
  * UP: h
  * UP:     macro). Using dedicated autoconf vars now (see sp-auto.m4).
  * UP:     Makefile.am's need to be updated.
  * UP:   * sp-auto-release: "getnews" facility and hilarious improvemen
  * UP: ts for
  * UP:     the "autonews" feature.
  * UP:   * m4: Fixing missing sp-libxslt.m4 from m4 installation, and s
  * UP: ome smaller
  * UP:     fixes for sp-doxygen/sp-*cruft.
  * UP: ----------------------------------------------------------------
  * UP: ------
  * UP: sp-auto-0.1.0 (unstable) (Mon Jun 13 14:06:03 UTC 2005):
  * UP:
  * UP: This is the initial sp-auto release. The only available document
  * UP: ation
  * UP: is currently in the README file.
  * UP:
  * UP: Status is that it is ready to replace the old setup, with many
  * UP: improvements. It should mature while being actually used, until
  * UP: the
  * UP: 0.2.x branch should be used by the "public".
  * MINI_BUILDD: AUTO_BACKPORTS: quantal-ab-experimental,raring-ab-
    experimental,saucy-ab-experimental,trusty-ab-experimental,squeeze-ab-
    experimental,wheezy-ab-experimental,jessie-ab-experimental,

  [ Stephan Sürken ]
  * ui-auto-release run by absurd@weslok.olx.intra.

 -- Stephan Sürken <absurd@debian.org>  Mon, 04 Nov 2013 10:16:08 +0100
